FM135 Electronic 24volt Non-Accumulative Timer
For our push button shower controls is a non-accumulating timer. Can be also set up with a (dead band)a time delay set up for the next shower.
The FM-135 timer is a programable timer that can control any 24VAC, 1A component (solenoid,Relay, etc) When the switch is pressed, the solenoid output will be energized from the amount of time selected by the dip switches.
- Tamper resistant features
The switch must be pushed AND released to activate a cycle.
The switch input is disabled during the On time, so it will not re-start until the cycle is finished.
The maximum time the valve will remain open while un-attended is limited to the ON TIME
Specifications
Power input 24VAC
Switch input: 24VAC, 1A max. Pulled to ground through triac.
Dip switch settings: On time of 945 seconds (15 minutes, 45 seconds) if all switches are on.
1- 15 seconds
2- 30 seconds
3- 60 seconds
4- 120 seconds
5- 240 seconds
6- 480 seconds